• Plywood is a composite material of wood which is composed of three or more layers of veneer glued together perpendicularly.
• The advantage of plywood, in comparison with wood, is better stability in shape and dimensions.
• Plywood can be used and modified with the same tools and machines as solid wood.
• USAGE: Thanks to its excellent quality (high strength, resilience, flexibility at low bulk density), plywood is an important material for furniture-making, joinery, production of packages (palettes, crates, cases), for non-load bearing constructions, for production of formwork – for concreting, in car industry – for walking surfaces etc.

PLYWOOD FOR JOINERS

PACKING PLYWOOD

FILM FACED PLYWOOD

• High-quality plywood with special film 120g/m².
• Edges are sealed with water-resistant acrylic paint.
• USAGE: used in the construction industry, in formwork systems for concrete construction, in car industry and agriculture, for production of components, traffic signs, poster sites.

ANTI-SLIP PLYWOOD

• One side provided with anti-slip wire mesh surface, the other is smooth.
• USAGE: floors in transport vehicles, walking surface in factory units, in construction industry.

• This is a constructional plate consisting of micro-veneer with wooden chips facing in all directions in three layers. Designed for bearing purposes.
• The main advantage of these plates is considered to be the fact that it combines a high level of durability with good drilling and cutting characteristics while maintaining structural integrity.
• The hard, smooth, hooded surface of the plate makes the cleaning process much easier.
• Due to the adhesive based on melamine the plate retains it’s dimensions in humid conditions (minor swelling and liner expansion).
• For 3 years Orlimex CZ, s.r.o. has been the proud official reseller of the Belgian producer SPANO on the markets of Czech Republic and Slovakia.
• APPLICATION: construction (interior walls padding, roof, floor), as bearing structure of wooden houses, sheathing, shipping container production, furniture manufacturing.

Main types and formats:

Plate with straight edges:
length x width = 2500 x 1250 mm, thickness = 10-25 mm

Plate with groove-ridge ends:
length x width = 2486 x 810 mm, thickness = 12-25 mm

• Flat wooden chips (20 – 75 mm of length) are stacked together into three layers
• In the two equally thick outer layers there are only chips oriented parallel to the longer sides of the plate
• In the inner layer, which forms 50% of the plates’ volume, the chips are mainly oriented parallel to shorter sides of the plate
• phenol-formaldehyde resin is used to form these OSB plates and its’ percentage in the overall weight of the plate reaches 2.5%
• the ends of the plate can be fitted with a groove-ridge to simplify connection; the surface of the plate can be sanded on the final steps of production
• tree species used – pine
• USAGE: OSB 3 is designed to be used in a humid environment, for the production of pallets, tar, crates, building of wooden houses, for beams and load-bearing structures, roof construction, flooring, wall panel production, etc.

Main sizes and types:

OSB 3
not-sanded plate with straight ends:
length x width = 2500 x 1250 mm, thickness = 6–25 mm

OSB 3
not-sanded plate with groove-ridge ends:
length x width = 2500 x 675 mm, thickness = 12–25 mm

Particleboard – raw

• Particleboard (known also as chipboard), is an engineered wood product manufactured from wood chips, sawmill shavings and a synthetic resin or other suitable binder, which is pressed and extruded.
• The board is suitable for humid conditions and can be refined with paper, melamine, veneer or laminate.
• The particleboard complies with the norm EN 312 and the standard E1.
• Usage: furniture, organization of exhibitions, production of packages, floors (under PVC, carpets, etc.)

Basic formats and types:

1830 x 2750 mm
2070 x 2800 mm
Thickness 6, 8, 10, 12, 16, 18, 22, 25 mm

ANTIVLAM

• Fire retardant particleboard for use in dry conditions.
• Chipboard with sanded, fine surface and particularly screwable core.
• Surface can be refined with paper, melamine, veneer or laminate.
• Usage: The board is especially appropriate to usage in public buildings such as hospitals, airports, restaurants, theaters, hotels, etc.

Basic formats and types:

Width 2030 – 2100 mm – length to 5700 mm
Width 2440 – 2620 mm – length to 6300 mm
Thickness 8 – 25 mm

BETONSPAN

• Melamine-coated moisture resistant board for professional concrete formwork.
• The board has high density and particularly screwable core.
• Surface with aminoplast film 200/200 g.
• The board is subject to minimal expansion and swelling in conditions of high humidity.
• The board is easy to saw and has low formaldehyde emission (E1 class).
• Usage: Suitable for concrete formwork.

Basic formats and types:

Width 1250 – 2030 mm – length to 5240 mm
Thickness 10 – 22 mm

HIDROFLAM

• The particleboard with the fire retardant characteristics of Antivlam combined with the properties of a moisture resistant P5 board.
• The board has high density, the particleboard with sanded, fine surface and particularly screwable core.
• MUF glued
• The board is subject to minimal expansion and swelling in conditions of high humidity.
• Surface can be refined with paper, melamine, veneer or laminate.
• Hidroflam withstands extreme heat and fire, does not contribute to flame spread and has a smoke development comparable to that of natural wood.
• Usage: The board is appropriate to usage in public buildings such as hospitals, airports, restaurants, theaters, hotels, etc.

Basic formats and types:

Width 2440 – 2620 mm – length to 6300 mm
Thickness 10 – 22 mm

• A raw fiberboard, produced in a wet process, with one smooth side, of density over 0,8 g/cm3
• USES: for further processing, as packaging material, in construction and woodworking.

Basic formats and types:

2470 x 2140 mm
2745 x 1700 mm
2745 x 1220 mm
2440 x 1220 mm
Thickness 3,2 – 5 mm